eduroam - Updating Your eduroam Password on Your Android Device

The network 'eduroam' is the preferred method for connecting to WiFi on campus. It stays connected in between buildings and only requires extra sign ins when you change your password every 6 months. When your password changes, you must update the password saved on your device. Follow the guide below:

Please note some menus may look different on your device compared to the screenshots, however the process is the same.

1. First, go to the settings app. Its icon typically looks like a gear. Once in the settings app, locate the 'connections' or 'WiFi' menu and tap it. If your device is like the one in the screenshots below, please tap 'WiFi' in the connections menu. Be sure not to tap the switch to the right of 'WiFi' as this will turn wifi off

   

   

2. In the wifi menu, you will see a list of available networks. Tap on the gear to the right of 'eduroam'. On the properties page

   

   

   Follow this, tap on 'eduroam' again to connect

3. The below menu will pop up. Before continuing, please ensure the following is correct:

   1. 'EAP Method' is set to PEAP
   2. CA certificate is set to Don't Validate
   3. Phase 2 authentication is set to MSCHAPV2

   

   Finally, enter your username (everything before the @ symbol in your email), and enter your new password. Leave all unspecified fields blank.

Congratulations, you should now be connected to eduroam with your new password! If you run into any issues, or this guide does not resolve your issue please give us at a call at 262-595-2444, or stop at the TechBar on campus.